| Operating protocol |
DiSEqCTM 1.2 compatible level and "Go
To X" function |
| Horizontal rotation |
Typically 95°, (99° max.) |
| Inclination (motor elevation) |
75° |
| Maximum antenna diameter |
140 cm, aluminum |
| Programmable positions available |
30 satellites |
| Maximum antenna mass |
12 kg, at rotating the dish around the
center-of-gravity point |
| Antenna support length |
90 mm |
| Bent motor pole diameter |
42.5 mm (1.67 inch) outside diameter |
| Rotation speed (unloaded) |
2.5°/s (H-18V) 2°/s (V-14V) ±25% |
| Rotation speed (with a 85-cm
dish) |
2.3°/s (H-18V) 1.7°/s (V-14V) ±25% |
| Operating power supply |
14 / 18 VDC |
| Power consumption in stand-by
mode |
15 mA ±25% |
| Power consumption in operating mode |
95-150 mA ±25% |
| (with a 85-cm dish) |
|
| Starting movement consumption (80
ms) |
350 mA |
| Operating temperature |
-35° C to +70° C |
| Min. and max. relative humidity |
35% to 100% |
| Connectors |
F type 7mm |
| Connections |
Sat coaxial cable 7 O impedance |
| Connection cable up to 30m |
Inner conductor Cu Ř 1.02 mm R=22 Ω/km |
| Connection cable up to 100m |
Inner conductor Cu Ř 1.13 mm R=18 Ω/km |
| EAST-WEST limits |
Hardware fixed, no programmable limit |
| Fine tuning step |
0.36° |
| Mass with box |
2.68 kg |
| Maximum permissible wind speed |
140 km/h / 80 km/h (km per hour) |
| for a 85cm / 140cm dish |
|
| Maximum permissible torque at
rotation |
15 Nm |
| Maximum static torque on idle |
150 Nm |
| Control buttons on motor |
2 (west-call and east-store) |
| Dimension of packed-into box |
268 (L) x 132 (W) x 155 (H) mm |
| Lifetime min. |
50,000 cycles over 180° (90°E +
90°W) |
