Connecting
an existing C & Ku-Band System
 |
Parts Required:
One 2-input DiSEqC Switch
Two HFS-2 Power Dividers
Five RG-6 Jumper Cables
Connect C-Band LNB input
cable to input
of C-Band HFS-2 Power Divider.
Connect Ku-Band LNB input cable to
input of Ku-Band HFS-2 Power Divider.
Powered output (right side) of each
HFS-2 goes to appropriate C or Ku-Band Input on Analog Receiver.
DC Blocked output (left side):
C-Band to DiSEqC input port #1.
Ku-Band to DiSEqC input port #2
DiSEqC Output to MPEG-2 LNB IN port.
|
|
Connecting
an existing C-Band system
 |
Parts Required:
One HFS-2 Power Divider
Two RG-6 Jumper Cables
Connect C-Band LNB cable to
Input of HFS-2 Power Divider.
Connect Powered output (right side)
to Analog Receiver LNB Input.
Connect DC Blocked output (left side)
to MPEG-2 Receiver LNB Input. |
|
Connecting
a standalone Ku-Band system
Connect RG-6 cable between LNBF at
dish and receiver (indoors).
|
|
|
GLOBAL COMMUNICATIONS
Mike and Laurel Kohl
S-9141 State Road 23
Plain, WI 53577-9612
|
Telephone
Hours
9 AM to 6 PM Monday - Friday
(Central Time)
|
Tel (608) 546-2523
Fax (608) 546-2157
E-Mail globalcm@mhtc.net
Back To Home Page www.global-cm.net
|
INSTRUCTIONS FOR
INSTALLATION:
|
|
Traxis
DBS-3500
|