|
Motorize Your
Antenna
Request
pricing
DiSEqC 1.2 MOTORIZED H to H Mount
Yes, it fits Winegard 76cm
dishes
Notice:
We sell and
service only the SG2100 with our DMS
International labels.
If you have bought
one of the copies we cannot service it for you and
we
do not pay the return shipping. Please check
your product before returning
it for service.
Failure rate of the copy motors is very
high. | |
| |
|
SG2100 - Still the best buy in DiSEqC
motors.
Note:
If your motor and box does not look like the
picture below, it's not the original SG2100 motor.
The original SG2100 is sold and serviced by DMS
International ONLY. Don't be fooled by the
knock-off motors using the SG2100 model number.
| | |
|
The
original SG2100..... Still the BEST!!!
Private label
available Parts that come with the
SG2100
Check for your
parts
Request
pricing |
|
Click to enlarge
|
|
50mm Replacement Tube
Do you have a larger dish
that requires a larger tube for
mounting??
Now the
50mm Replacement Tube is
available from your
DMS International
Reseller. 50mm Replacement Tube is a
direct
replacement for your existing
tube.
Contact
your DMS International Reseller for more
information. | | |
FEATURES:
- Fits all popular dish with 42mm tube,
including Winegard
- Special Design for any
Receiver with DiSEqC
1.2
- Only One Coaxial Cable
Control
- Go To X Function
- High Efficiency
- Compact Structure
- Ultra Low Noise
- Adjustable Hardware
Limits
- Easy Installation with LED
Indicator
- Manual EAST / WEST button
- For Dish up to 1.2M
|
| Specification: |
| Model |
SG2100 |
| Antenna
Diameter |
1.2M
Max. (33 lbs / 15 KG) |
| Azimuth
Angle |
70˚EAST ~ 70˚WEST (
140˚ )
Adjustable |
| Elevation
Angle |
25˚~75˚ |
| Input /
Output Voltage |
13 / 18
VDC |
| Power
Consumption |
50 mA (Standby mode)
200
mA (Normal)
350 mA (Max.)
|
| Rotation
Speed |
1.9˚ / sec
( at 13V) ; 2.5 ˚/ sec ( at
18V) |
| Satellite
Positions |
60 |
| Connector |
F
Type |
| Command
Protocol |
DiSEqC
1.2 |
| Resynchronize Function |
YES |
| Goto
Position 0 Function |
YES |
| Goto X
Function |
YES |
| Positioning Sensor |
High Resolution Hall Effect Sensor |
| EAST /
WEST Limit |
Adjustable
Hardware and Programmable
Software |
| Manual
Button |
EAST /
WEST |
| Indicating
LED |
YES
| color |
status |
indication |
| Green |
On |
Power On; Standby Mode |
| Orange |
Blink |
Receiving DiSEqC 1.2 Commands/ Reset
Mode |
| Orange |
On |
Error Message: Over Current / Hardware
Limit | |
| Tube size
for antenna |
55x160mm |
| Stand
size |
35~65mm |
Repair
Parts |
| SHIPPING INFORMATION: |
|
Model |
PCs/Carton |
G.W./Carton |
Meas./Carton |
PCs/20FT |
PCs/40FT |
|
SG2100 |
6 |
19.40 KGs |
1.67' |
3500 |
7000 | |
|
Parts that
come with the
SG2100
|
|
|
View, print, download the SG2100 Manual in
English
or in German
Or see our new "Easy
Install" SG2100 manual
Note: Always use
and follow the instruction manual that comes with your
SG2100
Reset
Instructions for the new SG2100 with 2 control
buttons.
- Turn off your receiver to stop the
power to the SG2100.
- Press and hold BOTH control buttons on
the motor.
- Turn on your receiver to apply power to
the motor. At this time the indicator light should
alternate between green and red. Continue to hold the
two control buttons until the indicator light shows a steady
green. The indicator light will normally flash from
green to red about 15 times.
- Your motor is now reset.
|
Contact your Authorized DMS International
Reseller Today.
|
| GLOBAL
COMMUNICATIONS
Telephone (608)
546-2523
E-Mail globalcm@mhtc.net |
